1. Product Description
Dimethyl Phthalate (DMP), CAS No 131-11-3, also named as phthalic acid dimethyl ester, is a dimethyl ester of phthalic acid. DMP is a plasticizer with strong solubility to a variety of resins, because of compatibility with a variety of cellulose resins, rubber, vinyl resins. Offered here at Integratechem, one of manufacturers and suppliers in China. This dimethyl ester has good film formation, adhesion and water resistance, so manufacturers usually use DMP in combination with diethyl phthalate in the production of cellulose acetate films, varnishes, transparent papers and molding powders. Factories produce DMP by the reaction of methyl alcohol with phthalic anhydride
Chemical name | Dimethyl Phthalate, 99% |
Synonyms | Phthalic acid dimethyl ester, Methyl phthalate, mosquito repellent oil, DEET; |
Molecular formula | C10H10O4 |
Molecular Weight | 194.18 |
CAS No. | 131-11-3 |
EINECS | 205-011-6 |
Properties | Boiling point 282.7±8.0 °C at 760 mmHg, melting point -5.5℃, refractive index n20/D 1.515(lit.). Slightly soluble in water and mineral oil, miscible with ethanol, ether, chloroform, soluble in benzene, acetone and other organic solvents. |
2. Specification of Dimethyl Phthalate
Product name | Dimethyl Phthalate |
Appearance | Colorless, transparent oily liquid |
Ester content, % ≥ | 99.0 |
Chroma, (Pt-Co) ≤ | 20 |
Acid value (mgKOH/g) ≤ | 0.2 |
Moisture, % ≤ 0.1 | 0.15 |
Density (25℃), g/cm3 | 1.19 g/cm3 at 25 °C (lit.) |
3. Characteristics of Dimethyl Phthalate
Boiling point | 282.7±8.0 °C at 760 mmHg |
Density | 1.19 g/cm3 at 25 °C (lit.) |
Flash point | 146.1°C |
Solubility | Colorless transparent oily liquid, slightly aromatic. It is miscible with ethanol and ether, soluble in benzene, acetone and other organic solvents, insoluble in water and mineral oil. |
Refractive index | n20/D 1.515(lit.) |
4. Application & Advantages
Dimethyl Phthalate, CAS No 131-11-3, also named as phthalic acid dimethyl ester, is a plasticizer with strong solubility to a variety of resins, and can be compatible with not only a variety of cellulose resins, but also with rubber and vinyl resins. Since dimethyl phthalate has good film formation, adhesion and water resistance, so, we usually use it in combination with diethyl phthalate in the production of cellulose acetate films, varnishes, transparent papers and molding powders. Factories also use it in the manufacture of nitrocellulose. In addition, people use this product as a plasticizer for nitrile gum, and the product has good cold resistance. When we use dimethyl phthalate with other plasticizers, it can overcome the shortcomings of high volatility and low temperature crystallization. People can also use it not only as a solvent for mosquito repellent oil (crude oil) and DDT, but also as a gas chromatography fixative.
5. Packaging / Storage / Transport
Use iron drum packing. 230kg / barrel. This product should be sealed in a cool and dry place. Firstly, it should be stored in a ventilated and dry place indoors to prevent water intrusion. Secondly, this product is flammable and should be avoided from ignition sources. In addition, storage and transportation in accordance with general flammable chemicals regulations.
Category: Phthalate Esters
Hot Tags: suppliers China, manufacturers, factory, Dimethyl Ester, Insecticide, Plasticizer for cellulose resins
Related Links: Diethyl Phthalate, Dibutyl Phthalate, Acetyl Triethyl Citrate, Dibutyl Adipate, Dimethyl Adipate, Triethyl Citrate